My home brew L-Carnitine.....

[Lordallmighty]

That is an awesome question. Unfortunately I cannot give a good answer on that. This is something I will need to research.

I've read that its been shown to have potential for preventing chronic inflammatory diseases like diabetes. It also shows potential with neurodegenerative disorders because it may interfere with the buildup of proteins that speed up the development of brain diseases like Alzheimer’s disease.

It could increase oxidative damage at higher doses and have an adverse effect on your immune system, too.

How would this act as a transporter to shuttle from the bloodstream into the cells?

Dont know if you mean carnitine, fulvic acid or MSM but i think you might mean MSM as that was what my post focused on

So MSM and DMSO is basically the same substance, DMSO is alot stronger but they do the many of same things. I belive its around 15-20% of MSM is created by DMSO. so msm is a byproduct of DMSO, wich is why they work in a similuar way

Taking DMSO orally and then a hour after take l carnitine (one should take them togheter but for the comparision on msm oral + carnitine inj) then it will have effected your cells and made them permable (belive the english word is) wich makes everything you take alot more potent and goes alot deeper into tissue. one should not drink tap water or eat really bad food/certen medications hours after taking DMSO as dmso when active in the body will make everything you take go into the blood/pass the blood brain barrier

So i would assume MSM would do the same and hopefully i can continue my morning fast and just dose my vitamins and have the carnitine shot be taken up!

I had great results combining MSM + EDTA for my heavy metal detox, went from iron posion to low normal levels. and EDTA cannot be taken up by oral. the only study i found with the combination was with EDTA eye drops for a eye disease, wich had basically zero uptake when dosed by itself and when adding MSM it raised to 60%. thats a huge increase so i assume it did the same when taking it orally w EDTA.

DMSO would be supperior but i cannot deal with the taste...

Taking a tablespoon dmso in a glass of distilled water and swallowing grams of carnitine would work great to. better to dissolve it in dmso before tho but the taste even with half juice would be horrible

 

[01dragonslayer]

To make this much you just change the amount x4?

Not sure what your asking.

 

[govertical19]

Sorry looking to make a large batch like that. But I see the original recipe is for a smaller batch. Asking what the change would be to make 400 ml

 

[DieselXT]

Sorry looking to make a large batch like that. But I see the original recipe is for a smaller batch. Asking what the change would be to make 400 ml

Multiply x4

 

[DieselXT]

@01dragonslayer subq 1ml went in near painless! Thanks brother!

For anyone wanting to make a smaller batch here is the recipe:

L Carnitine 600mg/ml 30mls

18G L-Carn base powder

14 ml bac water

 

[govertical19]

Multiply x4

Thanks! What’s the difference with the 700 ml?

 

[DieselXT]

Thanks! What’s the difference with the 700 ml?

Im bad at math lol. I would assume x 7 but if I were you id make small batches at a time just in case it degrades or oxidizes.

 

[DieselXT]

Thanks! What’s the difference with the 700 ml?

Dont be shy to ask @01dragonslayer, hes a great dude!

 

[theseeker385]

for 100ml you'll need 70g L-carn base for 700mg/ml
Its simple math, 700mg/ml x 100ml / 1000 = 70g
multiply that by 4 for 400ml @ 700mg/ml.

 

[01dragonslayer]

Sorry looking to make a large batch like that. But I see the original recipe is for a smaller batch. Asking what the change would be to make 400 ml

Exactly. If you have the supplies to do so go4it.

 

[01dragonslayer]

@01dragonslayer subq 1ml went in near painless! Thanks brother!

For anyone wanting to make a smaller batch here is the recipe:

L Carnitine 600mg/ml 30mls

18G L-Carn base powder

14 ml bac water

Great ta hear.

 

[01dragonslayer]

for 100ml you'll need 70g L-carn base for 700mg/ml
Its simple math, 700mg/ml x 100ml / 1000 = 70g
multiply that by 4 for 400ml @ 700mg/ml.

Just so its clear......

L-Carnitine 700mg/ml

....using Bac H2O....
70G L-Carn base powder
30ml Bac H2O

...using sterile/distilled H2O...
70G L-Carn base powder
29ml sterile/distilled H2O
1ml Benzyl alcohol
Remember when using BA...make sure you heat your sterile/distilled H2O PRIOR to adding your BA.

 

[govertical19]

Just so its clear......

L-Carnitine 700mg/ml

....using Bac H2O....
70G L-Carn base powder
30ml Bac H2O

...using sterile/distilled H2O...
70G L-Carn base powder
29ml sterile/distilled H2O
1ml Benzyl alcohol
Remember when using BA...make sure you heat your sterile/distilled H2O PRIOR to adding your BA.

Awesome stuff!

 

[govertical19]

@hopefultogrow

1. Guys have been dosing for years using multi dose vials. If or when something where to happen....and I believe you are referring to an infection it is typically rare and most often from user error. As long as proper sterile and aseptic techniques are practiced their should no issues and you product should remain safe.

2. Most recent I have brewed 5 Amino MQ and glutathione. In years past I would brew my own AS both injectable and oral.

3. I typically draw using an 18g and then swap for a 23 or 25g for injection depending on the viscosity of what I am injecting.

4. Pretty much all you may need can be found on Amazon at good prices. I typically buy L-Carn base powder, and BA on eBay. Vials, filters, syringes, needles, and alcohol preps on Amazon.

Just make sure when purchasing your L-Carn that it's 'base'.

Let me know if you have any more questions.

Do you have the recipe for the 5 Amino?

 

[01dragonslayer]

Do you have the recipe for the 5 Amino?

My recipes are all very similar. If I do not know how much a particular raw will displace my default is 1G/1ml.

For this specific raw and recipe of 5 Amino 1mq I applied my default formula. With this brew I had 11Gms of raw 5 Amino 1mq powder. In order for me to brew my desired dose of 150mg/ml I needed a total volume of 70ml. Here is my formula for 70ml of 150mg of 5 Amino 1mq injectable.

11G 5 Amino 1mq powder
58ml Sterile H2O
1ml BA

To be precise the final dose was appr 153mg/ml.

The brewing process is the same.
Let me know if you have any questions.

 

[govertical19]

My recipes are all very similar. If I do not know how much a particular raw will displace my default is 1G/1ml.

For this specific raw and recipe of 5 Amino 1mq I applied my default formula. With this brew I had 11Gms of raw 5 Amino 1mq powder. In order for me to brew my desired dose of 150mg/ml I needed a total volume of 70ml. Here is my formula for 70ml of 150mg of 5 Amino 1mq injectable.

11G 5 Amino 1mq powder
58ml Sterile H2O
1ml BA

To be precise the final dose was appr 153mg/ml.

The brewing process is the same.
Let me know if you have any questions.

Where do you get the the powder?

 

[01dragonslayer]

Where do you get the the powder?

L-Carnitine for Fat Loss, Energy, and Athleticism

L-Carnitine supplements support fat metabolism and energy production. L-Carnitine also boosts endurance and exercise recovery.

purebulk.com

 

[govertical19]

L-Carnitine for Fat Loss, Energy, and Athleticism

L-Carnitine supplements support fat metabolism and energy production. L-Carnitine also boosts endurance and exercise recovery.

purebulk.com

Thanks I meant the 5 amino

 

[DieselXT]

Bulksupplements l carntine is very good too.

 

[DieselXT]

For anyone that tests the pH this comes out to around 8.5 - 9 which I would say is spot on.

 

[DieselXT]

Big thanks to @01dragonslayer !!!

 

[DieselXT]

For anyone that tests the pH this comes out to around 8.5 - 9 which I would say is spot on.

Just was told PH should be lower and the higher ph may cause tissue damage. Fuck making aminos is difficult!

 

[01dragonslayer]

Thanks I meant the 5 amino

I have sourced from two suppliers. One international and one domestic.

You have a DM.

 

[govertical19]

Wow that’s a lot of powder. Making my first batch now didn’t realize it would be the entire bag at 600mg/ml

 

[govertical19]

Edited for 400 ml

 

[01dragonslayer]

Wow that’s a lot of powder. Making my first batch now didn’t realize it would be the entire bag at 600mg/ml

Great ta hear. Yes...this will definitely take some time but it's all worthwhile. Brewing your own is so much more cost effective.

Let us know how it goes.

 

[govertical19]

Man

L-Carnitine for Fat Loss, Energy, and Athleticism

L-Carnitine supplements support fat metabolism and energy production. L-Carnitine also boosts endurance and exercise recovery.

purebulk.com

man you really rock brother!! This was easy and awesome. The only thing I messed up was I originally grabbed the wrong bag. My Althean and El carnitine were next to each other and grab the thin and it would not mix and I was like what is going on! Then I realized and started over mixed easy you can see from all the pictures I use the stir and the filter with the vacuum made it super easy. Vacuumed the liquid through in 10 minutes. Super easy! Next time I’m definitely gonna do way bigger of a batch since I’m using the filters and I will do the 700/ml!! Great stuff you guys rock!

 

[01dragonslayer]

Man

man you really rock brother!! This was easy and awesome. The only thing I messed up was I originally grabbed the wrong bag. My Althean and El carnitine were next to each other and grab the thin and it would not mix and I was like what is going on! Then I realized and started over mixed easy you can see from all the pictures I use the stir and the filter with the vacuum made it super easy. Vacuumed the liquid through in 10 minutes. Super easy! Next time I’m definitely gonna do way bigger of a batch since I’m using the filters and I will do the 700/ml!! Great stuff you guys rock!

I have always used PureBulk for my raw materials. No issues using BulkSupplements raws? Wondering if there is any PIP using a different raw supplier. Have you poked yet?

 

[govertical19]

I have always used PureBulk for my raw materials. No issues using BulkSupplements raws? Wondering if there is any PIP using a different raw supplier. Have you poked yet?

No gonna tomorrow morning. Let it sit over night and make sure nothing crazy happens . After this batch I will try pure bulk. I already had this in my counter.

 

[govertical19]

I have always used PureBulk for my raw materials. No issues using BulkSupplements raws? Wondering if there is any PIP using a different raw supplier. Have you poked yet?

Tried a little dose, PIP is on par with Chase Irons product. Which isn’t bad to me. Gonna do a full dose tomorrow am. I normally do 1 ml in both shoulders, we shall see…