FIXING CRASHED GEAR (PSL customers please read)

[rdm]

I know some of you are dealing with the burden of colder temps. Bumping this to help y'all out

 

[Vision]

I know some of you are dealing with the burden of colder temps. Bumping this to help y'all out

These winter months never disappoint..

 

[Astro95]

Another to the list is the baby wipe warmer, gathered from @Matt88

 

[Vision]

Another to the list is the baby wipe warmer, gathered from @Matt88

I need to find me a MILF

 

[Matt88]

Another to the list is the baby wipe warmer, gathered from @Matt88

I gathered it from @CoachCabo so I can't take the credit for that ideas introduction to ASF. It works amazingly though!!

 

[Astro95]

I gathered it from @CoachCabo so I can't take the credit for that ideas introduction to ASF. It works amazingly though!!

Crazy how the anabolic tips go down the line lol

 

[Matt88]

Crazy how the anabolic tips go down the line lol

For sure! Probably 80-90% of the information I pass down I've obtained from @Vision and other ASF vets.

 

[Vision]

Crazy how the anabolic tips go down the line lol

Brother, we are standing on the shoulders of giants my man.
From my mentors before me, and all of my fellow peers, there's not a day goes by that I'm not learning something. We have to always pass on the torch.

 

[PlatePusher]

Dealing with Sus 250 right now tried the heating pad for 15 mins helped but didn’t all go away. May try the boiling water method next !!
Exp 2025. Some I had on stock figured I would use the older vials first. All 6 crystallized. Good info and thread.

 

[rdm]

Dealing with Sus 250 right now tried the heating pad for 15 mins helped but didn’t all go away. May try the boiling water method next !!
Exp 2025. Some I had on stock figured I would use the older vials first. All 6 crystallized. Good info and thread.

I like a candle warmer better than a heating pad personally.

You can always microwave a mug of water for 2 mins and put the vial in it standing up. That does the trick most of the time

 

[Astro95]

Dealing with Sus 250 right now tried the heating pad for 15 mins helped but didn’t all go away. May try the boiling water method next !!
Exp 2025. Some I had on stock figured I would use the older vials first. All 6 crystallized. Good info and thread.

Heat up shake, heat up shake and so on. I use hot water in a mug or topper container. Takes a bit, hotter the water the better, kinda warm won’t cut it.

 

[Vision]

Heat up shake, heat up shake and so on. I use hot water in a mug or topper container. Takes a bit, hotter the water the better, kinda warm won’t cut it.

Pretty much the same thing, would I sometimes do is just poor some very hot water inside of a ceramic mug or anything that is ceramic that will retain heat, from there I let it sit and I just shake the hell out of it..

 

[Astro95]

Pretty much the same thing, would I sometimes do is just poor some very hot water inside of a ceramic mug or anything that is ceramic that will retain heat, from there I let it sit and I just shake the hell out of it..

Yeah smart, I’ve thought about something similar, but don’t have anything around that holds heat, so I just switch water as it get colder. I uncrashed about 12 vials recently and it’s a process with the water method. Have about 20-30 more to uncrash

 

[Vision]

Yeah smart, I’ve thought about something similar, but don’t have anything around that holds heat, so I just switch water as it get colder. I uncrashed about 12 vials recently and it’s a process with the water method. Have about 20-30 more to uncrash

You can actually just use a coffee cup, because a coffee mug is ceramic and it will retain the heat for a while..

 

[Astro95]

You can actually just use a coffee cup, because a coffee mug is ceramic and it will retain the heat for a while..

That’s what I use I didn’t know they were ceramic I’m slow… at least that’s what I use when doing 4 vials tops for 12 I needed more room as I will for 20 more

 

[dteran61]

I have one of those candle warmers and they do get pretty hot. If it heats up to much will I ruin the compound?

 

[Vision]

That’s what I use I didn’t know they were ceramic I’m slow… at least that’s what I use when doing 4 vials tops for 12 I needed more room as I will for 20 more

Well I'm almost certain they're ceramic, I could be wrong but the are some form of pottery so I'm almost certain it's ceramic haha.
But even if you have one of those travel coffee mugs that are metal, you can use them as well they work phenomenal.

 

[Astro95]

I have one of those candle warmers and they do get pretty hot. If it heats up to much will I ruin the compound?

You shouldn’t

 

[Vision]

You shouldn’t

Like he said it shouldn't cause any problems, keep in mind that during the manufacturing process compounding these products, they can undergo some pretty serious heat, anywhere from 225-250 degrees, depending on the accuracy of the heating plate or if someone is using a convectional oven. Just keep a close eye on it and use common sense.

 

[PlatePusher]

Got them!!! Thank you everyone !!!
Knowledge Is Power

 

[Veneficus]

I didn't know this was a thing. Guess I've been lucky and not had any crash. Good to know for when it happens. Thanks for the info!

 

[Vision]

I didn't know this was a thing. Guess I've been lucky and not had any crash. Good to know for when it happens. Thanks for the info!

Yes it happens on occasions, even with pharmaceutical, pharmaceutical companies have even put out leaflets and pamphlets to customers and stores to give out to their clients, on how to handle this.

 

[Marvel3203]

I live in a cold climate and really the only compound that crashes consistently for me was 1 test cyp. However for the last 5+ years I weight up my gear before loading a pin whenever possible. Makes the process so much smoother and those times you have to pin 4 & 5 times a week the easier the better.

 

[ordawg1]

Great time to bump this thread as temps starting to drop-great info ~

 

[Platinumpharm]

Great time to bump this thread as temps starting to drop-great info ~

Yes perfect time to bump this. Crashed test c doesn't equate to "bad test C " . I use a pyrex measuring cup. I always hear mine up to get it very thin. It can be 100 degrees outside or -25 outside. I warm up all of my injects before using them.

 

[TomJ]

coffee mug warmer is the game changer, use it for every injection but also easily fixes crashed products.

https://a.co/d/i1ytqaW

 

[Marvel3203]

Whenever possible I heat up compounds to load as well. It speeds up the process so much.

 

[302]

I had some injectable anadrol crash recently. I used the coffee warmer. Made several attempts but couldn’t get it back. It was my first time dealing with anything crashed. I probably should have kept trying but ended up tossing it. I have more and it was half empty.

 

[Vision]

I had some injectable anadrol crash recently. I used the coffee warmer. Made several attempts but couldn’t get it back. It was my first time dealing with anything crashed. I probably should have kept trying but ended up tossing it. I have more and it was half empty.

I been there brutha... I tossed drol too for it not coming back ..... Drol always crashes, always!!!!!!!!!

 

[Vision]

I had some injectable anadrol crash recently. I used the coffee warmer. Made several attempts but couldn’t get it back. It was my first time dealing with anything crashed. I probably should have kept trying but ended up tossing it. I have more and it was half empty.

Speaking of crashing, bro literally my most recent touchdown, a good portion of everything was crashed, but go figure it's because the winter time haha.
So of course the wife wasn't happy that I was using her saucer heating everything up, She thinks it's going to contaminate it, and then get onto the food.
So I fucked with her and I told her the worst case scenario that could happen, is that she'll grow a mustache, hahahah