• 💪 Hello, please SIGN-UP FOR A FREE account and become a member of our community!
    You will then be able to start threads, post comments and send messages to other members. Thanks!
  • 🔥 Kits4Less.com #1 MOST LAB-TESTED SOURCE — 25% OFF YOUR FIRST ORDER! 🔥

Thick oil

Plt

Plt

Registered
Joined
Jun 20, 2012
Messages
245
Reaction score
18
[h=2][/h]
So after I received the lab's results to find out what I was injecting, I started a cycle using MrP GQ Test E 300. I found the oil to be thick as hell. I heated up the vial thinking it would tapper the thickness slightly, however it did not. I ended up using a 23gauge just to get the oil into the delt. Any suggestions to thin the oil out a little?​
 
I pin w 21g bro never had a problem last two pins I used 25 g wow takes forever if rather use the 21g I got a phat ass though maybe I'm kray
 
21g, damn bro. I used an 18G one time, and you can the skin snap when you pin. Never again.

In terms of thinning out the oil, unless you are ready to go through the process of diluting it, heating it up and using a larger pin is all I have ever been able to do in this sort of situation.
 
Plt said:
So after I received the lab's results to find out what I was injecting, I started a cycle using MrP GQ Test E 300. I found the oil to be thick as hell. I heated up the vial thinking it would tapper the thickness slightly, however it did not. I ended up using a 23gauge just to get the oil into the delt. Any suggestions to thin the oil out a little?​
Click to expand...
How did you heat it up? Try a hair dryers aren't always great, try submerging in very very hot water for a while. If that's still not enough, you could consider diluting it with more oil and just injecting more.

It's very unusual though that you had to change to a different gauge. Have you contacted MrP to find out if this is normal for this TestE? 300 really shouldn't have problems with thickness, it'd be interesting to see what oils he's using. Any PIP, by the way?
 
Thanks for the suggestions! I will try to heat it up a little longer than I did and see if that helps. I don't think I'm going to try to dilute the solution.
I did try to heat up the oil by running hot water over the vial. I think I will try to soaking it for a while longer, with a larger gauge needle, as I have access to several sizes.
 
Vicious 13 said:
I pin w 21g bro never had a problem last two pins I used 25 g wow takes forever if rather use the 21g I got a phat ass though maybe I'm kray
Click to expand...


I would run from a 21g pin. I'm inpatient too thou. So I use a 23g 1" to draw all my oils. Then a fresh 25g or 27g 3/4" or 1" to pin with it.
 
Vicious 13 said:
I pin w 21g bro never had a problem last two pins I used 25 g wow takes forever if rather use the 21g I got a phat ass though maybe I'm kray
Click to expand...
Wow, how often do you pin? I'd move up to 23g bro at the very least, you're gonna get some scar tissue in the long term if you stick with 21g.
 
Twice a week last two weeks I've been drawing w the 21 g and pinning w 25 but its much harder to pin glutes w 25 g
 
RAINier said:
How do you find pinning with a 3/4"? Where do you pin with it?
Click to expand...

Ive tried a 3/4 In the delt before but had gear leak back out :(
thats abuse and stick ( no pun intended ) with 1" or larger. May try a 5/8-3/4 for pecs sometime though.
 
i heat mine with a heating pad for 15 mins or so, then pin with a 23g...goes pretty smooth, heating makes all the diff
 
Thank you all for the advice. Not to sure if I will cont with this brand, as the PIP with this one is way more than with any other brand I have used.
 
Well, I'm going to be honest and say, I'm going to try a few things first before I ditch this bottle. First I'm going to heat the bottle a little longer and see if it thins it out a little more. Next, I'll use a 23 gauge from start to finish and see if it helps. But if after the second injection, the PIP is not better with this brand , I will switch it up with a different brand
 
Well, it is totally possible that I am a wimp and don't like the soreness that comes with injecting an oil that is thicker!
 
Ok, after second pin... I heated the vial for about 30min. And used a 23 gauge needle. This made it easier for the oil to be injected, how ever, the after math of the injection is still there. It's been two days with the same sourness as the first injection.
 
Plt said:
Ok, after second pin... I heated the vial for about 30min. And used a 23 gauge needle. This made it easier for the oil to be injected, how ever, the after math of the injection is still there. It's been two days with the same sourness as the first injection.
Click to expand...

Damn bro, ... Do you know what kind of oil is used? Prehaps a bad reaction to say EO?
 
Well, I think it might be time to change up the gear being used. Just a little disappointed.
 
Sorry to hear this bro, everyone has provided good suggestions to try an ease the pip, only one I think ya haven't tried was adding additional oil and trying to cut it down....
 
I'm not up to date on the procedure for doing my own dilute- I can help build a cycle- I can help with the diet, I can also help with the movment of the human body- but diluting may be out of my scope, any help with that would be great.

I have e-mailed a couple of people, just waiting to hear back from them.
I do have one question though, I have used 250/cc in the past with no PIP, would the fact of using 300/cc have any thing to do with this?
 
Plt said:
I'm not up to date on the procedure for doing my own dilute- I can help build a cycle- I can help with the diet, I can also help with the movment of the human body- but diluting may be out of my scope, any help with that would be great.

I have e-mailed a couple of people, just waiting to hear back from them.
I do have one question though, I have used 250/cc in the past with no PIP, would the fact of using 300/cc have any thing to do with this?
Click to expand...

Im by no means completely familiar with brewing but there would be a high BA % with 300mgs and if that's correct there would be more pip. Hopefully someone else can weigh in on that
 
I have used Test E 325mg/Ml Local UGL and T300 both hurt like hell.... try out GrAnabolics Sust 325, painless man
 

Latest threads

Back
Top