Pinning

radcock

radcock

Registered User
Registered
Joined
Mar 23, 2021
Messages
342
Reaction score
145
What's the best overall size gauge to use for pinning? I'm using 23g. Just aas nothing else.
 
radcock said:
What's the best overall size gauge to use for pinning? I'm using 23g. Just aas nothing else.
Click to expand...
For me 25g 1/2 or 5/8s..
I try to use 27s as much as possible though. But 25g 1/2 it's easy peasy Japanese for me.
 
220 said:
27 gauge is the only thing I have ever tried. I was talking with a friend about this a few days ago and he uses 18’s. Ouch!
Click to expand...
My first cycle we had 20s, 1.5s..
When my buddy unpackaged it and removed the cap it was at that moment that I was second-guessing everything. It was the size of a galvanized nail.
Peer pressure is a real thing, I was all about it weeks prior up until that moment. He eventually talked me into it. And I remember him making a remark about how much blood was gushing, I said "what does that mean, is everything okay".
I remember the first time I seen 23s and how much of a relief I felt. I wouldn't touch a 23 today if it was the last thing on the planet. 25 is my absolute minimum. If I can stay 27 most of the time, I'm comfortable and very happy.
 
Depending....oils......I've used as big as a 21g but typically 22/23g 1.5" in glutes....1" for all spot injections.

GH, slin, or any suspension.....27/28 g insulin syringe.
 
At first I use to use 1.5" 23G needle . Then moved to 1" 23G needle . Shit I only use 18g for extracting.
 
Buy 23g w/3ml syringes. Buy 27g pins only. Fill from vial with 23g. Swap out 23g for a fresh 27g to inject. using the same needle to push through the stopper and inject after is gonna create scar tissue. Esp if you are using a 23g.
 
Sustanon redi ject 18 guage 1998 first shot. Lol. Then 22 g. Modern day 25x1 or slin pins.
 
I use 27G x 3/4 "
sometimes a 25 G, nothing below.
 
I’ve tried 25g but it takes forever I feel like. 23 1.5” for me now. I do feel like maybe going back to 25g when using tren because for me I feel like if I inject slower it reduces the risk of that ridiculous cough
 
Iike to microwave a cup of water for 30 seconds and drop my pin in there for a couple of minutes and it flows through a 25 pretty easily then.
 
CB2015 said:
I’ve tried 25g but it takes forever I feel like. 23 1.5” for me now. I do feel like maybe going back to 25g when using tren because for me I feel like if I inject slower it reduces the risk of that ridiculous cough
Click to expand...
Use a 18-20g drawing pin, once you fill the barrel and change your tip, put the cap back on the syringe and give it a good blast with hot forced air from a blow dryer.
You can even pull the plunger back a little bit filling the chamber with 1mL or more of air, and this can allow you to tilt it back and forth like a bubble in a level to help evenly disperse the heat transfer.
This will also lube the interior of the barrel to help reduce any friction. And obviously the oil viscosity will be thinner, and this can be used successfully with 27g.. but most definitely not a problem at all with the 25g. 👍
 
Vision said:
Use a 18-20g drawing pin, once you fill the barrel and change your tip, put the cap back on the syringe and give it a good blast with hot forced air from a blow dryer.
You can even pull the plunger back a little bit filling the chamber with 1mL or more of air, and this can allow you to tilt it back and forth like a bubble in a level to help evenly disperse the heat transfer.
This will also lube the interior of the barrel to help reduce any friction. And obviously the oil viscosity will be thinner, and this can be used successfully with 27g.. but most definitely not a problem at all with the 25g. 👍
Click to expand...
Hell yeah I like this method. Thanks for this tip
 
Pathadden said:
Hell yeah I like this method. Thanks for this tip
Click to expand...
Just remember to cap the syringe, because whatever is in the air will be blasted onto the barrel/cap. I heat the first, the prep my injection sites after, during that time I clean my hands and don't touch anything else other than the needle.
Cross contamination is a real thing. My OCD is bad when it comes to prepping.
 
Vision said:
Just remember to cap the syringe, because whatever is in the air will be blasted onto the barrel/cap. I heat the first, the prep my injection sites after, during that time I clean my hands and don't touch anything else other than the needle.
Cross contamination is a real thing. My OCD is bad when it comes to prepping.
Click to expand...
Will do brother
 

Latest threads

Back
Top