Diluting 500mg/ml test e

[jbad1019]

I came across a bit of 500mg/ml test e, it all tested well through jano but theres probably no chance of me pinning that high of a concentration. Im looking to dilute it by matching the carrier oil, im no home brew guy but is it as simple as it seems by just doubling the carrier oil or am I looking at having to heat up the oil on a stir plate to get it to mix properly?

 

[Vision]

I came across a bit of 500mg/ml test e, it all tested well through jano but theres probably no chance of me pinning that high of a concentration. Im looking to dilute it by matching the carrier oil, im no home brew guy but is it as simple as it seems by just doubling the carrier oil or am I looking at having to heat up the oil on a stir plate to get it to mix properly?

That sounds like it's going to hurt no matter what you do to it, that's a lot of concentration even if you cut it down. Most especially with that ester.

 

[jbad1019]

That sounds like it's going to hurt no matter what you do to it, that's a lot of concentration even if you cut it down. Most especially with that ester.

Thanks for the reply, figured id at least try to lower it some before trying it out.

 

[Dexitrim]

Thanks for the reply, figured id at least try to lower it some before trying it out.

Just get some grapeseed oil or mct oil (ebay), draw 1/2 ml into the barrel and then draw however much Test you want into the barrel and pin it. Just add more gso or mct next time if 1/2 ml is not enough to prevent pip.

 

[Bigdaddyjak]

Pretty much dilute it with anything 1/2cc if test with 1cc of EQ or anything else u have oil based . I’d just throw it away !

 

[Marathon]

I’d just throw it away !

Right were it belongs