Suspect Tren Enanthate

[BC22]

it is easier to name yourself the gatekeeper to standards, how people conduct buisness, and what they must add to their posts rather than to offer your knowledge and helpful discussion.

You literally have a super moderator from this board telling you to name the sponsor…..his roll is the gatekeeper of standards here….

 

[Veneficus]

True and noted. If I have an issue moving forward with a sponsor again ill go that route. Appreciated.

Just say who it's from right now. Why would you want a replacement from the same "lab"?
If they're that fucking dirty and sloppy, you think it'll be better on the next one? Even if they clean up the next one you don't know how dirty the equipment was when they measured it, brewed it, moved it into vials, etc. Lots of places to be contaminated. And BA doesn't kill toxic chemicals, metals or particulates that could poison your body.
I know the sources I buy from are good but some newbie on here might not. They'll go for the cheapest shit and end up getting a chunk of flesh cut out when it turns septic.

And a coffee filter is not good enough. A 22 micron ptfe syringe filter will get most of the solid particles and is the best bet but even that isn't guaranteed. Molecules of poisonous chemicals will still get through.
My 2 cents. Moving on.

 

[Cypher]

Shit looks like it was brewed in someone’s bathtub in some eastern bloc country.

“Kazakhstan brew.”

 

[Uniqueplay]

Thanks man. Thats disappointing.
Once I saw it I knew something was f***** . it looks almost like Chicken ramen without the ramen or to be honest and gross, It looks like dehydrated piss. I've tried heating it multiple times and it just never blends in. this was the first time purchased with this source, Hoping it would go smooth. Even letting them know that I was in search of a new consistent source, and this would just be a trial run. Also the vial of test that I got I had little black foreign debris inside of it. I just didn't show the picture because I hadn't removed The label. is the tren a complete waste, Or is there a way to filter it myself? Might be a stupid question. But if it's possible, it would be good to know anyways.
Thanks

Honestly you can probably filter it and it would likely clear up. I'd probably filter just for the experiment. If your getting a reship then don't worry about it. (Unless the reship looks the same ).

 

[Lustyscripps]

appreciate the advice on letting the board know who the sponsor was. If I run into a situation with another ill take that route.

Marathon, since you're one of the only ones that really offered any answer to my original post, thanks. Truly appreciated, and it goes to show why your product and buisness are who you are. I'll be returning back, whether you still run your sustanon and test deal or not.

For everyone else who was so concerned about the righteousness of the online chat board , stating im "passing the buck" onto the next guy, I know you're your true concern is the next guys safety so,

If you recieve a vial of ugl gear, that looks suspicious but are not experienced enough to know about the old coffee filter method or lack of, do as I did and throw it away. Maybe even pass on asking opinions on what the cause could be here because minus 1 or 2, the sole focus of people will be the source and naming who sold it, not your post. Whether you give the source the benefit of the doubt or not as to malicious intent, it doesnt matter here to some. because just as with social media or any other public discuss platform, it is easier to name yourself the gatekeeper to standards, how people conduct buisness, and what they must add to their posts rather than to offer your knowledge and helpful discussion.
So if it looks shady, does not reconstitute after warming...do like I did and toss it, contact source and have them correct the situation.
Hope that helps. Thanks.

You’re in a situation like that right now- why aren’t you helping other board members save some money and time? Just name the source. Too much bullshit has happened for everyone to go through this again. A super mod gave you the green light. Quit fuckin around and tell us

 

[StellarLabs]

( removed label of source due to them responding that they will reship and apologized
Hey everyone,
Just had a small test order on a potential new source arrive. I ordered 1 Test Cyp and 1 Tren Enanthate. Pictured is the Tren, anyone have any idea what's going on here? Ive attempted to heat back see if the compounds mix with no results. And not even sure if it would have seperate since tempature has been ideal. (removed source label due to their apology and stating they will reship, . Had no answers to my questions though).

Thanks guys. ♾

Looks like a UTI to me. Someone needs antibiotics immediately.

 

[Cypher]

Honestly you can probably filter it and it would likely clear up. I'd probably filter just for the experiment. If your getting a reship then don't worry about it. (Unless the reship looks the same ).

 

[Uniqueplay]

I mean, yeah, F that. I myself would just be curious to see how well filtering that milk would turn out.

 

[MBW212]

hey , I’ve done that ! 30 years ago , with finapkex pellets !!

Wow I remember them, I think mine were pink, guy told me to swollen them I probably took it wrong because I don’t remember seeing any results

 

[MBW212]

I would like to know the source so I know to stay away, I’m sure others feel the same

 

[Jbswole40]

 

[Marathon]

I have said this a thousand times -

If you have gear that crashed, throw it the fuck out.

I have NEVER seen a bottle that crashed get reheated and stay in suspension. Period.

I know some compounds are harder to keep from crashing, well, they CAN be made so they don't crash, and regularly, so if your "whatever" crashed, find a source who can fucking do it right.

Extreme cold is the only legitimate excuse for gear crashing. End of story.

It's not crashed lol. That's just the way it looks

 

[Bigdaddyjak]

They were so cheap ,

Wow I remember them, I think mine were pink, guy told me to swollen them I probably took it wrong because I don’t remember seeing any results

a pack of 100 in a cartridge was like $20, we were told crush them up and take them sublingual . That’s was like in 97 , finally someone told use how to make liquid

 

[Veneficus]

OP said he couldn't get it to go back into solution from warming it. I've experimented with freezing oils for long term storage, and I got test cyp & E, DHB, Primo, Masteron E, and Tren E to go back into solution after being frozen solid just by letting them come up to room temp slowly and then putting them on a candle warmer for 20 minutes or so.
I'm thinking that's not crashed gear. It's spooge. Some dude spooged in the vial. Or it's fungal, or algae growth because there's not enough BA in there and it's feeding off of the unfiltered shit floating around in it.
I'm sure the next batch will be fine though

 

[Marathon]

OP said he couldn't get it to go back into solution from warming it. I've experimented with freezing oils for long term storage, and I got test cyp & E, DHB, Primo, Masteron E, and Tren E to go back into solution after being frozen solid just by letting them come up to room temp slowly and then putting them on a candle warmer for 20 minutes or so.
I'm thinking that's not crashed gear. It's spooge. Some dude spooged in the vial. Or it's fungal, or algae growth because there's not enough BA in there and it's feeding off of the unfiltered shit floating around in it.
I'm sure the next batch will be fine though

I've said it before I'll say it again, that's what tren will end up looking like when it's not filtered. It gets worse over time. That source has been slanging that trash for awhile now, this is third post I've seen about it. The last one was in their sub forum, but they deleted it.

 

[Jbswole40]

I've said it before I'll say it again, that's what tren will end up looking like when it's not filtered. It gets worse over time. That source has been slanging that trash for awhile now, this is third post I've seen about it. The last one was in their sub forum, but they deleted it.

Gc schooled me on alot of shortcuts or just laziness and disregard about process, im no brewer.just always in school learning things.i have thrown away so much gear ,its just not worth it.i had my share of issues and legitimate health issues..its just not worth it..

 

[Cypher]

I'm sure the next batch will be fine though

That doesn’t really apply when a tren vial has basically turned into a living ecosystem.

But yeah.

 

[302]

I would like to know the source so I know to stay away, I’m sure others feel the same

rhymes with “she rifts” maybe..

 

[SB Labs]

rhymes with “she rifts” maybe..

Or you s pee???

 

[Razzle Dazzle]

I did better than hat with the Fina kit 20 years ago . Damn

and we didn’t really know shit

 

[rylifts22]

Or you s pee???

I have Tren e and A from them, doesn’t look like this at all. And just got done using the tren a without issue no pip or weird shit.

I Inspected tf out of all the vials with the flash light and took stickers off to get a better look after the last guy posted a pic of his a few weeks ago, none of my vials had any issue,

But then again, I guess that doesn’t mean much of anything, cuz clearly this vial and whatever is in it is beyond fucked.

I’m with everyone else, source should be named and it needs to be addressed either way. Regardless of who it is.

 

[MufasaTheKing]

I wouldn’t chance it. Looks like you’ll need amoxicillin injecting that.

 

[rylifts22]

I wouldn’t chance it. Looks like you’ll need amoxicillin injecting that.

And possibly an exorcism

 

[Bigdaddyjak]

I’m sure it’s probably a pretty new sponser !

 

[Marathon]

appreciate the advice on letting the board know who the sponsor was. If I run into a situation with another ill take that route.

Marathon, since you're one of the only ones that really offered any answer to my original post, thanks. Truly appreciated, and it goes to show why your product and buisness are who you are. I'll be returning back, whether you still run your sustanon and test deal or not.

For everyone else who was so concerned about the righteousness of the online chat board , stating im "passing the buck" onto the next guy, I know you're your true concern is the next guys safety so,

If you recieve a vial of ugl gear, that looks suspicious but are not experienced enough to know about the old coffee filter method or lack of, do as I did and throw it away. Maybe even pass on asking opinions on what the cause could be here because minus 1 or 2, the sole focus of people will be the source and naming who sold it, not your post. Whether you give the source the benefit of the doubt or not as to malicious intent, it doesnt matter here to some. because just as with social media or any other public discuss platform, it is easier to name yourself the gatekeeper to standards, how people conduct buisness, and what they must add to their posts rather than to offer your knowledge and helpful discussion.
So if it looks shady, does not reconstitute after warming...do like I did and toss it, contact source and have them correct the situation.
Hope that helps. Thanks.

I respect that though, hopefully the replacements don't look like that.

 

[H2o1]

Just say who it's from right now. Why would you want a replacement from the same "lab"?
If they're that fucking dirty and sloppy, you think it'll be better on the next one? Even if they clean up the next one you don't know how dirty the equipment was when they measured it, brewed it, moved it into vials, etc. Lots of places to be contaminated. And BA doesn't kill toxic chemicals, metals or particulates that could poison your body.
I know the sources I buy from are good but some newbie on here might not. They'll go for the cheapest shit and end up getting a chunk of flesh cut out when it turns septic.

And a coffee filter is not good enough. A 22 micron ptfe syringe filter will get most of the solid particles and is the best bet but even that isn't guaranteed. Molecules of poisonous chemicals will still get through.
My 2 cents. Moving on.

Agreed.

Name the fucking source dude that’s the whole point of a source board.


Sent from my iPhone using Tapatalk

 

[rylifts22]

Agreed.

Name the fucking source dude that’s the whole point of a source board.


Sent from my iPhone using Tapatalk

Most of us already kinda know or atleast have an idea of who ( could be wrong of course), something similar was posted a few weeks ago, there’s part of it still up if you go looking on a primo thread.

I use this source my self and have had zero issues, and just came off their tren and still using some of their other stuff, and will likely continue to do so tbh, but yeah my vials looked nothing like this, wasn’t even the same color, but still doesn’t make this situation any better I’m not out to hang anyone or bash anyone my self, but still should be addressed cuz it’s happened to more than one person now, and with the same compound basically, only difference was the other guy was tren A if I remember correctly.

sources should be named when shit like this happens, and then they should address it, make the necessary changes to make sure it doesn’t happen again and move on.

Pretty simple.

At the end of the day, as consumers we have to inspect our gear, and if something don’t look right, don’t use it, and reach out to source and hopefully they make it right.

I had tren that looked absolutely beautiful and clear and clean but gave me the worse pip ever and fevers I tossed it after 3 shots, got refunded, and moved on with my life. Shit happens. ( wasn’t a sponser here)

 

[H2o1]

I agree with you, name the source, but also give the source credit if they made it right and have produced quality products in the past.

I’ll even add I’ve gotten horrible pip from compounded pharma test…shit happens.


Sent from my iPhone using Tapatalk

 

[Hablooblah]

( removed label of source due to them responding that they will reship and apologized
Hey everyone,
Just had a small test order on a potential new source arrive. I ordered 1 Test Cyp and 1 Tren Enanthate. Pictured is the Tren, anyone have any idea what's going on here? Ive attempted to heat back see if the compounds mix with no results. And not even sure if it would have seperate since tempature has been ideal. (removed source label due to their apology and stating they will reship, . Had no answers to my questions though).

Thanks guys. ♾

Oh I know...you have a bottle of almost guaranteed sepsis... ill just say i bet you had to pay $60+ for shipping from a country that starts with C and clear customs to get that horrible sh*t. I really hope that didnt come from 1 of our d*mestic sources. If it did I wanna know who for real. I can think of 1 that had this problem recently with the same compound tho. Here's to hoping that was a 1 off and this isnt gonna be a recurring thing with them.

 

[Hablooblah]

Oh I know...you have a bottle of almost guaranteed sepsis... ill just say i bet you had to pay $60+ for shipping from a country that starts with C and clear customs to get that horrible sh*t. I really hope that didnt come from 1 of our d*mestic sources. If it did I wanna know who for real. I can think of 1 that had this problem recently with the same compound tho. Here's to hoping that was a 1 off and this isnt gonna be a recurring thing with them.

Just read through the thread, would love to know why someone would post pictures of a vial of tren that has grown its own biosphere of bacteria or fungus in the "SOURCE CHECKING AND DISCUSSION" forum and doesnt want to discuss the damn source?! Appreciate the heads up man, protect the source that sent you a vial of death and not your fellow members. Stand up guy