PIP brewing help

[Valdosta]

I have 60 vials of shitty chinese test 600 i was gunna use for personal use in case gear dries up forever. whatever muscle its put in to is unusable and untouchable for 2 weeks. I got some sterile mct oil and cut it at 50-50 so its now test 300. it still hurts pretty damn bad so the concentration wasnt the problem, all the solvents are. Grok says I can try putting some "painfree oil" or "pf oil" into it. Is this a reasonable approach? any brewers/labs/homebrewers have any idea what i could do?

 

[Valdosta]

bump
@SB Labs
@Marathon

 

[Farmerdan]

I’ve got some test 600 mix that fucking kills. I’ve been adding 2ml of it to test 200 and 250 to make 12ml vials of 250/300 respectively. Slowly but surely dwindling the supply. But 60 vials, good luck lol

 

[Omoplata]

Val, you may have to dump it man.

 

[Valdosta]

Val, you may have to dump it man.

hell no. knocking this shit down to 100mg/ml if thats what it takes
altho i really wish i had just bought normal test 250 instead

 

[thebiggestdumbass]

Once you made it 250mg/ml are you pinning just the test or other compounds with it?

 

[Valdosta]

Once you made it 250mg/ml are you pinning just the test or other compounds with it?

im just running 1800 test right now. ive pinned half a mil of the full 600 with a couple other compounds pip free before so ik it wouldnt be bad if i added eq and deca in right now. but i want to save that for after surgery.

i think i might cut it in half once again, getting it down to 150mg/ml. then pin 1ml ed which would absolutely suck and bring my total down to 1500mg a week. but should be bareable

 

[thebiggestdumbass]

im just running 1800 test right now. ive pinned half a mil of the full 600 with a couple other compounds pip free before so ik it wouldnt be bad if i added eq and deca in right now. but i want to save that for after surgery.

i think i might cut it in half once again, getting it down to 150mg/ml. then pin 1ml ed which would absolutely suck and bring my total down to 1500mg a week. but should be bareable

You could add sterile MCT oil to the pin probably wouldn’t take much

 

[Valdosta]

You could add sterile MCT oil to the pin probably wouldn’t take much

hell i think i'll go ahead and add eq to it

 

[PRorER]

Bro, you fucked up wouldn’t be surprised if there’s some EO or some
Guaiacol in it

 

[Valdosta]

ive decided my best option is to split my 2 30ml vials of pippy t300 into 4 30ml vials, filling the rest with 15mL of pipfree @Marathon t250. the result will be test 275, which i can pin 3x a week at either 2ml, 2.5ml, or 3ml for 1650, 2060, or 2475 test respectively. leaning towards 2060.

 

[Bigdaddyjak]

hell no. knocking this shit down to 100mg/ml if thats what it takes
altho i really wish i had just bought normal test 250 instead

I don’t care how bad it gets , I’d throw any 600mg test right in the trash !! lol
Back in early 2000s seen my first test 400(I think it was just test e) and bought a bunch , after 2 or 3 weeks it was in the garbage !

 

[PRorER]

ive decided my best option is to split my 2 30ml vials of pippy t300 into 4 30ml vials, filling the rest with 15mL of pipfree @Marathon t250. the result will be test 275, which i can pin 3x a week at either 2ml, 2.5ml, or 3ml for 1650, 2060, or 2475 test respectively. leaning towards 2060.

Even if you do this, the PIP is probably coming from the solvents they used to stabilize it at 600mg, not necessarily the oil itself. I’d really think about doing that because it might feel the same, maybe slightly better but still pippy. You’d basically be wasting good gear if it doesn’t work how you want it to

 

[Bigdaddyjak]

It’s definitely worth mixing 1/4 or 1/2 cc with a cc or a bit more of good test or deca to knock it down . Don’t get me wrong, I’d try a few different avenues just like your doing to get what I can out of it !! Trial and error brotha !!

 

[Meetketchup]

Just keep everything clean and sterile. Don't want to grow another foot from infection.

 

[timtdp]

So the solvents in tren A and Winstrol injectable oil was really crippling. My body did get used to it after months of injecting. I would recommend cutting it down to 200 and maybe playing with the carrier oils as that can slow down absorption, which can help with pip. Another thing I did was mix it half a syringe of EQ Part test part tren a.

 

[Meetketchup]

@Marathon Maybe the master will chime in.

 

[Valdosta]

Even if you do this, the PIP is probably coming from the solvents they used to stabilize it at 600mg, not necessarily the oil itself. I’d really think about doing that because it might feel the same, maybe slightly better but still pippy. You’d basically be wasting good gear if it doesn’t work how you want it to

when ive loaded some of the test 600 straight into a syringe with some other compounds the pip wasnt noticeable so im thinking this will definitely work

 

[Bolan]

Bro, you fucked up wouldn’t be surprised if there’s some EO or some
Guaiacol in it

This......

You can try and cut it with CSO and refilter.

EO or Guiacol is some bad shit......Im severely allergic to both, puts
me in the hospital.

 

[PRorER]

This......

You can try and cut it with CSO and refilter.

EO or Guiacol is some bad shit......Im severely allergic to both, puts
me in the hospital.

Personally, I’ve never heard of Test brewed over 500mg that doesn’t use EO or Guiacol and stays stable

 

[Valdosta]

Personally, I’ve never heard of Test brewed over 500mg that doesn’t use EO or Guiacol and stays stable

even with a 22g this stuff draws at like 1ml per 2 mins

 

[PRorER]

even with a 22g this stuff draws at like 1ml per 2 mins

Doesn’t surprise me in the slightest, 600mg is a ton to put into 1mL. did they ever list what solvents or carrier oils for the Test?

 

[Valdosta]

Doesn’t surprise me in the slightest, 600mg is a ton to put into 1mL. did they ever list what solvents or carrier oils for the Test?

no it was more like dank yu for yora bisanezz come again preeeez

 

[Marathon]

ive decided my best option is to split my 2 30ml vials of pippy t300 into 4 30ml vials, filling the rest with 15mL of pipfree @Marathon t250. the result will be test 275, which i can pin 3x a week at either 2ml, 2.5ml, or 3ml for 1650, 2060, or 2475 test respectively. leaning towards 2060.

So you're going to contaminate the good gear you have with the shit? IDK if that's the play here lol.

 

[Valdosta]

So you're going to contaminate the good gear you have with the shit? IDK if that's the play here lol.

ya if its still pippy ima blame my marathon test

 

[Marathon]

ya if its still pippy ima blame my marathon test

Throw that shit out and charge it to the game. I would never buy any finished oils from China, let alone 600mg test. All you're going to do is ruin your good gear by mixing it.

 

[Valdosta]

Throw that shit out and charge it to the game. I would never buy any finished oils from China, let alone 600mg test. All you're going to do is ruin your good gear by mixing it.

i'll update in the morning. rolling the dice with 1.5 vials of good gear to see if 60 bad vials can be corrected reasonable investment imo.

 

[PRorER]

i'll update in the morning. rolling the dice with 1.5 vials of good gear to see if 60 bad vials can be corrected reasonable investment imo.

Bro why waste more money lmao

 

[Sector.]

Bro, you fucked up wouldn’t be surprised if there’s some EO or some
Guaiacol in it

The Chinese lather their finished gear with EO.

Their brewers basically bathe in it. I wouldn’t be suprised in the slightest if there’s a fuckload of eo in it.

 

[Valdosta]

also gotta mention @SB Labs didnt ignore my cries for help here, he dmed me what his approach would be to make sure i didnt miss it. stand up fella.