Needle size?

[Pete48]

Where does everyone get their 25g 1" syringes from? Ive been using 27g 5/8 insulin syringes but would prefer 1" as sometimes there is leakage

I have gotten mine from Amazon for years with no problem,by the 100. I use 18g to draw and a 27g 1" to pin. I will be swapping to 25g 1" next couple days

 

[Pete48]

29 worked ok but was really slow to draw. I changed to 27 and it’s faster but I’m more likely to bleed a tiny bit. Just a dot. Either worked fine though.


Sent from my iPhone using Tapatalk

I have used a 27 g 1" to pin for several years but it is soo thick I am going to start using 25g 1" to pin and 18g to draw

 

[bigrond]

I have used a 27 g 1" to pin for several years but it is soo thick I am going to start using 25g 1" to pin and 18g to draw

18 will hole punch your tops after awhile a 23 draws just fine even thick oils. And its less abuse to your vial top

 

[Pete48]

18 will hole punch your tops after awhile a 23 draws just fine even thick oils. And its less abuse to your vial top

Agreed

 

[danhrph]

You can use as small as 30g 1/2” LL needle (Amazon) and 1ml LL syringe. I prefer 20g to draw because 18 can potentially damage the stopper with repeated draws. If you try to use 3ml syringe even with as big as 25g it will be much more difficult to push

 

[RogueTech1]

You can use as small as 30g 1/2” LL needle (Amazon) and 1ml LL syringe. I prefer 20g to draw because 18 can potentially damage the stopper with repeated draws. If you try to use 3ml syringe even with as big as 25g it will be much more difficult to push

Man, I have always used a 3ml no matter the amount I am pinning, saw your comment and ordered some 1ml LL and it flows so good through a 27g. I did get the BD 1ml LL syringes so that might make a difference also, they are polycarbonate and very smooth but expensive if you can even find them.

 

[Knarfster]

Was lazy and didn't feel like swapping needles so put the 23g into my VG.... Was fine

23 @1 1/4 inch is my ventro go to.

 

[primalsource]

Which needle do you recommend for pinning & drawing Test E?

It'll be .5mL into my delt, I'm about 10-12% body fat. I was thinking of using a 29g, 1/2-inch insulin syringe. Just not sure which one to draw the actual oil, or if that's fine for drawing it.

Just recalled I'm giving blood Sunday. It's 16 gauge, every time I can't believe how huge that is.

Depends where you're pushing it in. If you're new it could hurt becuase it's not intramuscular (IM). For me I use 25 gauge, 1". I can not use anything less because my subcutaneous layers will not absord it.

Good luck!

 

[Jbswole40]

3ml barrel just not necessary for me,its hard to be accurate, and i feel 1ml just easier in everyway..25 - 28g for everything. U learn over the yrs..alot of oil or a little.

 

[Majinbot72]

25Gx16mm to draw and 27Gx13mm to pin everywhere. I was using the 25Gx25mm (1inch) for the glutes but I dont use it anymore I dont want scar tissues

 

[RogueTech1]

25Gx16mm to draw and 27Gx13mm to pin everywhere. I was using the 25Gx25mm (1inch) for the glutes but I dont use it anymore I dont want scar tissues

you must be super lean to be able to use a 1/2 in the glutes

 

[Shmalohim]

blow out medical . com

has a supplier ever offered or sold a needles with an order for you?

 

[RogueTech1]

has a supplier ever offered or sold a needles with an order for you?

Do you mean a Source from the forum? GYM n Tonic carries some stuff, not sure of anyone else.

 

[Radical]

25 draw 29, 30 slam 1" all ya need

 

[AR-15]

Pussies. Real men roll with 18ga for everything. 18gauge is when you know a motherfucker wants it.

 

[Radical]

Pussies. Real men roll with 18ga for everything. 18gauge is when you know a motherfucker wants it.

You must be from the 90s, too. Them were the days. Youngsters these days dont know about scar tissue

 

[AR-15]

You must be from the 90s, too. Them were the days. Youngsters these days dont know about scar tissue

Not really but when I started all I could get my hands on, that I knew was legit, was way outdated redijects. Fuckers still worked like a charm though. Been chasing those dragons ever since.

 

[Majinbot72]

you must be super lean to be able to use a 1/2 in the glutes

I'm about 10% bf. No problem with 13mm in the glutes I'm pushing the needle a bit more inside and I have no bumps left

 

[snood]

25 draw 29, 30 slam 1" all ya need

What are you pushing through 29 & 30 gauge? I used 27 for .88ml cyp/npp blend and my hand got sore pushing. Can’t imagine 29 or 30.


Sent from my iPhone using Tapatalk

 

[Radical]

Now just test. The last few years its been tren, metribolone, and test and tren bases. The oil these days is so thin ive never had a problem with 29s or 30s. I also inject slow as to not stir up any pip. And also mostly insulin needles

 

[chadmack]

Where does everyone get their 25g 1" syringes from? Ive been using 27g 5/8 insulin syringes but would prefer 1" as sometimes there is leakage

Medlabgear

 

[chadmack]

3ml barrel just not necessary for me,its hard to be accurate, and i feel 1ml just easier in everyway..25 - 28g for everything. U learn over the yrs..alot of oil or a little.

Hard to push the oil through those big 3ml barrels compared to 1ml barrel.
Part of the reason i pin ed, that & stability

 

[Jbswole40]

Hard to push the oil through those big 3ml barrels compared to 1ml barrel.
Part of the reason i pin ed, that & stability

Exactly. Guess us older fellas learn.
Less oil,less scar tissue less problems etc

 

[RogueTech1]

Hard to push the oil through those big 3ml barrels compared to 1ml barrel.
Part of the reason i pin ed, that & stability

someone else posted that they use 1ml and 27g needle and its way easier to push so I got some 1ml syringes and he was right, way easier then a 3ml.

 

[NoxyGen]

I use 1ml Luer Locks. Pull with a 21, 1" and inject with a 25 1" IM Thigh or Glute. I have some 1/2 inch needles to try my shoulder/pecs soon. I use smaller for peptides and NAD and also have two nice injectors with ceramic needles for hgh or peptides.