• 💪 Hello, please SIGN-UP FOR A FREE account and become a member of our community!
    You will then be able to start threads, post comments and send messages to other members. Thanks!
  • 🔥 Kits4Less.com #1 MOST LAB-TESTED SOURCE — 25% OFF YOUR FIRST ORDER! 🔥

Gear warming question

SB Labs
For me personally I just heat the barrel with the draw needle on like you stated. Although after I’m always on it with alcohol wipes as well. Maybe it’s not the best practice after reading some comments. So far it’s worked for me.
 
Syntha Claus said:
Bro, molten lava gear is

It front loads milligrams the hotter it is when injecting. Plus it boosts hypertrophy and cellular development.
Click to expand...

I can see it now:

“Santa’s Anabolic Warmer. Your gear will be pure fire!”

Only question is whether you go with Amazon, QVC or just get a bunch of broccoli heads to spam tik toks about how awesome it is


Sent from my iPhone using Tapatalk
 
McPriimate said:
I can see it now:

“Santa’s Anabolic Warmer. Your gear will be pure fire!”

Only question is whether you go with Amazon, QVC or just get a bunch of broccoli heads to spam tik toks about how awesome it is


Sent from my iPhone using Tapatalk
Click to expand...
My gear is always fire. I brew it so smooth that I started adding habanero to give it some kick. Everyone knows pip=potency.
 
McPriimate said:
Test c 250mg/ml, EQ 300mg/ml, NPP 200mg/ml, YK-11 40mg/ml

None of these give me any particularly bad pip on their own except the NPP (which I'm finishing up from a previous source and about to transition to the more reasonable 100mg/ml from a much better one!). Thought perhaps between mixing them in one barrel (already do that to limited avail) and heating (we'll see) that I might be able to mitigate the soreness. I mean, I can train through it and expect some, so it's not a big deal - just trying to save my pain for the stuff that matters lol

I did try warming the barrel under water, as described above, so we'll see how that works in a day or so. Definitely seemed to inject with less pressure at any rate. Will try the coffee warmer approach as well in the coming days/weeks (depending on when I remember to order another one for this house - the other one is in our place in the city)
Click to expand...
A concentration that high in one ml of NPP can already be painful just because of the sheer amount of hormone that needs to be absorbed. You're right — 100 mg/ml will definitely be more reasonable. It’s not worth sacrificing how you feel just because of the pain. On top of that, the irritation and inflammation it causes are basically mini-injuries that weaken your system and slow down recovery after hard training sessions. So honestly, it’s not worth spending health and time dealing with that.


Cheers.
 
Syntha Claus said:
My gear is always fire. I brew it so smooth that I started adding habanero to give it some kick. Everyone knows pip=potency.
Click to expand...
Hello and warm greetings. I’ll say this — in the old school mindset, it used to be: “if it doesn’t hurt, it doesn’t hit.” I still remember those days — legendary stuff.
 
Syntha Claus said:
I knew guys that adjusted Anadrol dosage based on nose bleeds.
Click to expand...

I was training back with a buddy last year, masters bodybuilder, and we were hitting some bent over rows and he started leaking.

My immediate question was "are you running dbol or anadrol and how much?" Then told him "get off that shit."
 
SB Labs
Coffee Mug Warmer worked pretty well.

Turned on the warmer and went for a walk
Came back and plopped my custom blended vial for the week in the coffee mug
Waited 5 min as I made my Cream of Rice
Drew easy and injected smooth into my glute. 1.27ml went through a 25g needle pretty well out of a 2.5ml syringe. Usually it's an annoying push
 
WED said:
Coffee Mug Warmer worked pretty well.

Turned on the warmer and went for a walk
Came back and plopped my custom blended vial for the week in the coffee mug
Waited 5 min as I made my Cream of Rice
Drew easy and injected smooth into my glute. 1.27ml went through a 25g needle pretty well out of a 2.5ml syringe. Usually it's an annoying push
Click to expand...

Did you put water in the mug and the mug with the vial in it on the warmer?

Not sure why but I was imagining just putting the vial on the warmer directly - but now am questioning all my life choices lol


Sent from my iPhone using Tapatalk
 
McPriimate said:
Did you put water in the mug and the mug with the vial in it on the warmer?

Not sure why but I was imagining just putting the vial on the warmer directly - but now am questioning all my life choices lol


Sent from my iPhone using Tapatalk
Click to expand...
Hmm. Am I doing it wrong?

I guess I could put the vial directly on the hot plate. I used water and a mug
 
GrindingGrey said:
Do what works for you but using a wax melt warmer, the oven, soaking vials, etc seems like overkill. Just run the syringe under hot water with the cap on for 20 seconds.
Click to expand...

Definitely easier

It’s what I’ve been doing the last week. Seems to work pretty well in that it’s pushing through a 27g more easily than before. Not sure if I’m warming it a lot or a little is all, as you can’t exactly do like a baby bottle wrist temperature test. But seems to be working for the injecting, even if the soreness doesn’t seem much different as yet (have to do it a few more times to really be able to compare though).

Will try the coffee mug warmer after a couple weeks of this so I can compare. Just out of curiosity as much as anything


Sent from my iPhone using Tapatalk
 
WED said:
Hmm. Am I doing it wrong?

I guess I could put the vial directly on the hot plate. I used water and a mug
Click to expand...

I have NO idea lol. Blind leading the blind. You could be doing it 100% right as I was just imagining how to use the mug warmer

Didn’t think this post would be as active a post as it’s been. Lots of options of how to do it, but seems that most people recommend warming in some way, so it’s good to have options I suppose


Sent from my iPhone using Tapatalk
 
chadmack282 said:
I just run hot water on the barrel with the needle cap on.
Click to expand...
Yep.

Just put the syringe under hot water in the sink, make sure it doesn't move, after a minute switch out tips and get the shot.

Not that much thought to it ....
 
For the mug warmer guys, vials directly on the plate or in a mug with water on the plate?

[mention]WED [/mention] now need to know lol


Sent from my iPhone using Tapatalk
 
this whole warming gear thing is cracking me up! I've been just hitting the syringe with hot water like some of you guys mentioned , but now I'm picturing myself setting up a whole coffee mug warmer station like WED ! Maybe I'll try that next, just to feel like a mad scientist brewing up some potent juice. If it makes the NPP a little less stabby, I'm game for anything!
 
McPriimate said:
For the mug warmer guys, vials directly on the plate or in a mug with water on the plate?

[mention]WED [/mention] now need to know lol


Sent from my iPhone using Tapatalk
Click to expand...
Go for my morning walk.
Turn on coffee mug warmer with mug on top & water
Get back and place vial in it
Make my Cream of Rice
Vial is warm and ready to inject.

Am I doing it right? IDK. It works tho. Primo 200 and Tren Ace going in like butter without a pinch
 
SB Labs
WED said:
Go for my morning walk.
Turn on coffee mug warmer with mug on top & water
Get back and place vial in it
Make my Cream of Rice
Vial is warm and ready to inject.

Am I doing it right? IDK. It works tho. Primo 200 and Tren Ace going in like butter without a pinch
Click to expand...

If primo 200 isn’t biting you, I’d say it’s working (and you have a good brewer lol)

Didn’t mean to call you out - I mistyped and meant to say “I now need to know” as in with or without a mug. But appreciate the detail (maybe I need to incorporate some CoR into my shot prep lol)


Sent from my iPhone using Tapatalk
 
McPriimate said:
If primo 200 isn’t biting you, I’d say it’s working (and you have a good brewer lol)

Didn’t mean to call you out - I mistyped and meant to say “I now need to know” as in with or without a mug. But appreciate the detail (maybe I need to incorporate some CoR into my shot prep lol)


Sent from my iPhone using Tapatalk
Click to expand...
I didn't think you were calling me out lol

This is some pure Chinese Non Label Primo pre China Peptide Factory Raids. It doesn't have any floaters, group testing was spot on. We'll see when I pull labs in 6 weeks
 

Latest threads

Back
Top