• Hello, please REGISTER and become a member of our community! You will then be able to start threads, post comments and send messages to other members. Thanks!

Easy steps to success with reconstituting/mixing your EuroTropin/Geno cartridges

Vision

Team supervisor P.S.L.
Staff member
Super Moderator
Joined
Aug 20, 2013
Messages
21,606
Reaction score
9,792
Points
113
Get Shredded!
Easy mixing steps for a dummy!
eurotropin-hgh-191aa-etc-40-iu-dual-chamber-.jpg

Easy steps to success with reconstituting/mixing your EuroTropin/Geno cartridges without using a Ready-Pen...

Some time back I explained about reconstituting the GH cartridges without using a pen, by utilizing a blunt object such as a pen or a screw-driver... I had this Video saved for sometime now and should have posted it soon to SUPPORT my explanation..

Step 1) Simply remove cartridge from packaging

Step 2) Place Pencil,Pen, or Phillips-screw driver in rear behind plunger and SLOWLY press with STEADY force.. Do NOT worry about water leaking out, the rubber stopper/plunger is super tight..Remember to go slowly in order to avoid damaging the Lyophilized Polypeptide (HGH)..

3) Roll around SLOWLY to assure all recombinants/amino acid residues have mixed equally... Once mixed allow it to sit for 20-45 mins (preferably in the frig)


FYI - After mixing the powder with the liquid/solution, Eurotropin & Genotropin must bestored in a refrigerator (2° to 8°C), for up to 4 weeks. Thereconstituted solution can remain at room temperature for upto 2 hours prior to each injection. Once the injection isadministered, the reconstituted solution MUST be returned tothe refrigerator. The cycle can be repeated over the allowable4 week period, but ALWAYS return to frig and KEEP out of UV light (The hormone is extremely sensitive to light, and sudden movement)


Official leaflet for Geno's with FULL description on mixing with pens and storage details (same applies for EuroTropin Cartridges)


http://www.pfizer.ca/sites/g/files/g10017036/f/201505/Genotropin_PM_E_control_178688_20_Jan_2015.pdf

Below is an instructional video demonstration using of the Screw-driver/pencil method I have recommended for reconstituting WITHOUT the Ready-Pen..











 
Last edited:

dylanvib4

Registered Member
Joined
Oct 11, 2014
Messages
2,121
Reaction score
88
Points
48
Location
Dirty South
Good info here for guys without mixing pens. I use the plunger of a slin pin, fits perfectly, roll between fingers and thumb, then store in refrigerator in a decongested area.

Sent from my SM-N910V using Tapatalk
 

MiSh

Registered Member
Joined
Apr 2, 2015
Messages
10,149
Reaction score
212
Points
63
As always
Vision
Is and always
Be the "MAN"
 

DarkBeast

PSL COACH
Registered Member
Joined
May 11, 2016
Messages
534
Reaction score
11
Points
18
Perfect guide! Now I can link people to this thread
 

jozifp103

UncleZ Representative
Board Rep
Joined
Mar 29, 2014
Messages
3,384
Reaction score
1,198
Points
113
Very useful! The video visual pretty much makes this idiot proof.
 

P.S.L.

Board Rep
Joined
Jan 13, 2013
Messages
254
Reaction score
73
Points
28
Easy mixing steps for a dummy!
eurotropin-hgh-191aa-etc-40-iu-dual-chamber-.jpg

Easy steps to success with reconstituting/mixing your EuroTropin/Geno cartridges without using a Ready-Pen...

Some time back I explained about reconstituting the GH cartridges without using a pen, by utilizing a blunt object such as a pen or a screw-driver... I had this Video saved for sometime now and should have posted it soon to SUPPORT my explanation..

Step 1) Simply remove cartridge from packaging

Step 2) Place Pencil,Pen, or Phillips-screw driver in rear behind plunger and SLOWLY press with STEADY force.. Do NOT worry about water leaking out, the rubber stopper/plunger is super tight..Remember to go slowly in order to avoid damaging the Lyophilized Polypeptide (HGH)..

3) Roll around SLOWLY to assure all recombinants/amino acid residues have mixed equally... Once mixed allow it to sit for 20-45 mins (preferably in the frig)


FYI - After mixing the powder with the liquid/solution, Eurotropin & Genotropin must bestored in a refrigerator (2° to 8°C), for up to 4 weeks. Thereconstituted solution can remain at room temperature for upto 2 hours prior to each injection. Once the injection isadministered, the reconstituted solution MUST be returned tothe refrigerator. The cycle can be repeated over the allowable4 week period, but ALWAYS return to frig and KEEP out of UV light (The hormone is extremely sensitive to light, and sudden movement)


Official leaflet for Geno's with FULL description on mixing with pens and storage details (same applies for EuroTropin Cartridges)


http://www.pfizer.ca/sites/g/files/g10017036/f/201505/Genotropin_PM_E_control_178688_20_Jan_2015.pdf

Below is an instructional video demonstration using of the Screw-driver/pencil method I have recommended for reconstituting WITHOUT the Ready-Pen..














Simply AWSOME and SOOOO useful !!

Long live the V. !!!
:winkfinger:
 

Mighty-Mouse

The Video Guy
Registered Member
Joined
Sep 20, 2014
Messages
8,261
Reaction score
1,617
Points
113
Location
In my wife's purse
I will say this, PSL is lucky to have a guy like macedog!!

I just started growth for my first time 9 weeks ago and he was one of my guys I bounced questions off of. Def knows what he is talking bout. Glad he is apart of most forums I'm on and consider him a friend.
 

Vision

Team supervisor P.S.L.
Staff member
Super Moderator
Joined
Aug 20, 2013
Messages
21,606
Reaction score
9,792
Points
113
I will say this, PSL is lucky to have a guy like macedog!!

I just started growth for my first time 9 weeks ago and he was one of my guys I bounced questions off of. Def knows what he is talking bout. Glad he is apart of most forums I'm on and consider him a friend.

MaceDog deff is good people man, thanks for sharing brother...
 

VTX

Registered Member
Joined
Sep 17, 2015
Messages
988
Reaction score
26
Points
28
I used the plunger of a slin pin to push the dilutant through and it worked beautifully! It is a great deal more convenient than having to mix 10iu amps every time!


Sent from my iPhone using Tapatalk

Euro or Geno. What batch number if they Euro
 

VTX

Registered Member
Joined
Sep 17, 2015
Messages
988
Reaction score
26
Points
28
Because I know the ones I have you ain't pushing the plunger with a slin pin, Philips screw driver or any other device. The only way to get the bac water to the GH is to extract it with a syringe and then inject into the chamber with the GH. A little more work but still nice having the 40iu. I was just wondering if your batch was later . I know PSL was supposed to have corrected the problem. Just wondering what the did with all the ones from the batch id that I have
 

dawg16

Board Rep
Board Rep
Joined
May 29, 2014
Messages
4,519
Reaction score
913
Points
113
With the 12mg/36iu Geno vials, I always vent the vial with a pen needle or a slin pin with out the barrel in it. Relieves pressure. I'm surprised no one has mentioned this.
 

Nbrossard

Registered Member
Joined
Nov 1, 2016
Messages
6
Reaction score
0
Points
1
So how much on a 1ml insulin syringe would I pull for 3iu if I'm only mixing 1ml of water into 40iu of powder?? Somebody help me out!
 

cybrsage

Registered Member
Joined
Oct 1, 2015
Messages
257
Reaction score
12
Points
18
Awesome post - I was wondering how to use them since I cannot seem to source any pens!
 
Top