- May 13, 2016
- Reaction score
Upgrade the Basics for a Bigger Chest
Got a puny chest? Bench pressing more weight won’t be what builds it. If your pecs have stopped growing, here’s what to do.
Ever since Arnold became the face of bodybuilding, big pecs and arms have been the priority of young men in gyms everywhere. Not surprisingly, the bench press has become the favorite lift of gym rats. Ironically, it’s not that great of a pec builder… at least the way most people do it.
If you put all your hopes for bigger pecs on the bench press, you’ll end up disappointed. And I could say the same about other staple pec exercises like the dumbbell flye.
Here are three adaptations to common chest exercises that’ll make it much easier for you to build your pecs.
1. The Flye PressThis could be the most effective pec builder. There, I’ve said it. Am I committing a cardinal sin by saying the best exercise to build the pectorals isn’t a big barbell lift? Well, hear me out.
This is coming from someone who loves the bench press, incline press, and heavy dips… someone who has benched 445 pounds. Yet, at the height of my pressing power, my chest was my least developed muscle group. (My delts and triceps did most of the work.)
The best way to develop your pecs is with an isolation exercise… kinda.
The flye press is the lovechild of a dumbbell flye and a dumbbell press. You do the eccentric (lowering) portion of the movement as a flye and the concentric (lifting) part as a press. There’s a little more to it than that, but take a look:
The Flye Press
Why is it the best pec-building exercise? To find out, we need to look at two of the main mechanisms behind muscle growth: muscle damage and mTOR activation.
When you want to maximize both, the key is to lengthen/stretch the muscle fibers while they’re under tension. The more tension the fibers produce when they’re lengthening, the greater the muscle damage, mTOR activation, and subsequent growth.
When the muscle fibers are producing more tension (more force), more actin-myosin bridges are created within each fiber. And the more bridges you have while you’re forcefully stretching those fibers, the more damage you’ll create.
The purpose of the concentric phase is to recruit more muscle fibers and make them produce more tension to increase the number of actin-myosin cross bridges. This sets up the eccentric to be done under the best possible conditions to trigger growth (lengthening the fibers under control while having maximum tension).
If you have very little tension at the end of the concentric range of motion, it’ll be much harder to get the most out of the eccentric phase. That’s the limitation of regular dumbbell flyes and even the bench press.
During a regular dumbbell flye, there’s a lot of tension on the pecs from the bottom position up to around the middle of the range of motion. When you approach the end of the lifting phase, there’s very little tension on the pecs.
The flye is a great exercise, in theory, because of the stretch you impose on the pectoral fibers. But because you lose a lot of tension at the end of the lifting phase, you make the subsequent lowering phase much less effective.
Not to mention that you can’t use a lot of weight with normal dumbbell flyes, which also decreases fiber recruitment and tension.
That’s where the dumbbell flye-press combo comes in. By doing the concentric portion of the lift as a press, you can use more weight (more tension) and because of the line of action (pretty directly against gravity) you can maintain a high level of tension right to the end much more easily than with a flye.
More weight and maintained tension mean that you’ll start the eccentric phase, which you’ll perform as a flye, much more effectively. You’ll be using more weight and producing a lot more tension while you’re stretching the fibers during the eccentric. This will cause more muscle damage, mTOR activation, and a greater growth stimulus.
HOW TO DO IT
- Start from the top (arms in a finished dumbbell press position). Lower the weights down slowly (4-5 seconds down). You want a slight elbow bend to shift most of the work onto the pecs instead of the biceps and front delts, but not too much.
- Go as low as you can, really feel a good stretch in your pecs.
- In the low position, bring the dumbbells in by flexing the elbows until the forearms are perpendicular to the floor, getting into a pronated position.
- Press up and slightly inward, focusing on squeezing the pecs.
- When you reach the top, start from step one.
- Once it’s hard to keep lowering the weights under control and you likely won’t be able to lift them back up, hold the low position of the flye as long as tolerable for your last rep. Try to eventually reach 30 seconds or more.
Do 6-10 reps per set. Lower the weight slowly (3-5 seconds) and lift at a moderate speed that’ll let you concentrate on contracting the pecs. You should be able to use around 80-90% of the load you’d use on regular dumbbell presses.
2. The Nilsson PressI often use resistance bands to “redirect” tension during barbell lifts, allowing me to focus more on certain muscle groups. The sweeping deadlift is a good example.
Another awesome application comes from the mad scientist, Nick Nilsson. You attach bands outside of a 25-pound plate on each side of a barbell that’s been set up for bench pressing. Then you put your forearms inside the loop of the bands.
The Nilsson Press
When you press the barbell, you consciously focus on pushing against the bands, trying to press your elbows in. This will shift the stress away from the shoulders and onto the pecs.
This is actually the correct way to bench press, but very few people do it. Instead they simply press the barbell up, moving the shoulders toward the ceiling. This both shifts the stimulus away from the pecs and increases the risk of shoulder injury.
Note: In the demo I’m not using weight outside of the bands so that you can more easily see the proper set-up. Normally I add weight to properly load the exercise. Total weight should be around 40-60 pounds less than what you use on a normal bench press.
HOW TO DO IT
Image-11000×409 63.1 KB
- Put a 25-pound plate on each end of a barbell. It should be around the middle point of the sleeve (use a collar inside the plate to secure it).
Image-21000×409 66.5 KB
- Wrap a small resistance band outside of that plate on each side.
Image-31000×409 63.3 KB
- Add weight outside of the band, so that you have the proper load for your set. Start with around 40-60 pounds less than what you’d use on a normal set.
- When you’re lying on the bench, pass your forearms through the loops of the bands.
- When pressing the weight up, focus on pushing the elbows in and pulling the bands.
3. The Squeeze PressThis is one of my favorite mind-muscle connection builders for the chest. If done properly, no other exercise will teach you how to recruit the pecs as quickly.
I like to use it early in a workout or as the first exercise in a superset (more on that in a second), especially if you have trouble feeling your pecs working.
The Squeeze Press
Because of its nature, you can actually do this exercise very frequently. Every day in fact. Why? Because it will cause next to no muscle damage, so it’s super easy to recover from.
This is why it’s my go-to exercise to fix a lagging chest. When you have a lagging muscle, most of the time it’s simply because you’re not good at recruiting it. And the key to becoming better at contracting a muscle is to practice it often. No movement will teach you how to flex your pecs better than the squeeze press.
If you’re using it as a true hypertrophy tool, not for motor learning, you must go to the point where it hurts/burns. Do sets where you’ll be under tension for at least 30 seconds, more likely 40-60 seconds.
Why? Because this exercise won’t cause much muscle damage or mTOR activation, so you need an accumulation of local growth factors and lactate to grow. The higher your discomfort tolerance is on this movement, the more you’ll benefit.
HOW TO DO ITThe squeeze press is a dumbbell bench press with one slight difference: the dumbbells are kept in contact with each other at all times and you’re actively squeezing them inward (against each other) as hard as possible. This simple action will shift all the stress onto the pecs.
Squeeze as hard as possible during every inch of every single rep. This is what makes this exercise effective.
Use a slow concentric/lifting tempo. This makes it simpler to hold a maximum inward press. It will also increase the time under tension, allowing you to more easily reach the required lactate accumulation and local growth factors release.
If you execute the concentric portion in 3 seconds and the eccentric in 1 or 2 seconds (a rare occasion where the concentric should be slower than the eccentric) you’ll need 8-12 reps to get into the right zone.
The Mighty Pecs Giant SetTry combining all three exercises into one bad-ass giant set that’s guaranteed to inflate your chest instantly.
- Start with a set of the squeeze press for 8-12 reps and go close to failure.
- Taking as little rest as possible, move to the Nilsson press for another 8-12 reps. Once you reach close to failure, take the bands out and finish with as many normal bench press reps as possible.
- Move on to the flye press and go to failure, 8-12 reps again.
You only have to do 1-2 sets to get as much pec stimulation as you’d ever want or need!