NEW STEROID MARKET INFO. Read [emoji3593][emoji3593]

Results 1 to 5 of 5
  1. #1
    Registered User
    maxmuscle1's Avatar


    Join Date
    Apr 2015
    Posts
    21,470

    Thanks Thanks Given 
    34,256
    Thanks Thanks Received 
    19,659
    Thanked in
    11,854 Posts
    Rep Points
    728561140

    NEW STEROID MARKET INFO. Read

    Aug, 2021
    Gadeas Steroid intermediates : tried offering $176million to get AMRI Nanoparticle nano crystals , for steriod API market. (they said China would and is making it cheaper and the deal didnít happen.
    UGL/Pharma superfine/nanopowder anabolic steroid raws may be hitting the market. The only (micronized) raws I have seen : stanzolol for aqueous and test base for aqueous. They use the term micron or submicron based on the milling(through fine mesh (mechanical/ball/ and jet strainers). They have Wet milling and Dry milling. The reason behind micronizing a raw steroid powder is : increased bioavailability, more of the API(active pharmaceutical ingredient) in poorly soluble materials ie. carrier.
    Wet milling works better but can skew results, wet milling does tend to create finer particles, it also increases costs and steps and adds many variables that dry milling doesnít include.(most raw API Co. wonít do anything that increases their costs).

    The important Part
    REFERENCE FOR LAY PERSONS: milling -
    *Mechanical- a particle size of 200 mesh (74 microns), with a typical mid-range particle size of 80 mesh (177 microns). Contamination is a problem because they pulverize with metal(why we see it in proper lab analysis) if I donít see they tested for heavy metal contaminants, I wonít consider buying. (Not that I buy anything).
    *Ball mills- cheapest and most used in pharmaceutical industry. This technique also serves as an intensive mixing technique capable of producing co-ground, pharmaceutical-**excipient mixtures (Sustanon/Blends)comprising amorphous drug forms mixed with suitable hydrophilic excipients at the molecular level.
    *Jet Mills- jet mills allows the pharmaceutical manufacturer to grind a friable or crystalline material to an average particle size of 1 to 10 microns. One of the most important characteristics of a jet-milled product is the huge increase in surface area. Milling a material thatís 30 mesh (595 microns) down to 2,500 mesh (5 microns) results in 1,643,000 times the number of particles and a surface area thatís 118 times greater. This allows for faster chemical reaction times and improved pharmaceutical ingredient performance. They used four API compounds an increase of 50 percent in the solubility of an insoluble antimicrobial compound when the particle size was reduced from 2.4 μm(micron)to 800 or 300 nm(nano).

    Maxís Thoughts:
    This concludes my research(everyday), more to come. Soon very strong, less toxic orals, oils, injectables nasal, pellet, liquids, melting film strips will become available. Some using multiple technologies and changing the industry IR/ER/SR/CR oral and injectable (sustained/controlled/slow/long release). I can imagine a 400mg/ml testosterone propionate with zero chemicals added and No PIP, also; a 50mg testosterone propionate that equals 500mg because of increased bioavailability. They could also make 2000mg/2-3ml testosterone propionate that would release over a 14-90 day period, depending on what the customer needed.
    **They already have made a 100mg/.25ml and 200mg/.5ml testosterone that is currently trying to be marketed for subcutaneous injection, one has a 32g 4mm needle and the other is a needless auto injector(they are not yet available). Problem is: the Big Pharma companies are only interested in profits, they donít see value in making a powerful or safe anabolic steroid....but they are all over Large dose long acting HGH and Peptides because they can charge $30,000 a month for it. Hopefully in the countries that anabolic steroids are legal for use or sale, we will see the first products like these . Alpha Pharm made a CR(controlled-release)12 hr Dianabol 25mg tab and Levitra 20mg film strips(like Listerine).

  2. #2
    Board Rep
    BOARD REP
    Bigmurph's Avatar


    Join Date
    Oct 2012
    Location
    Somewhere in the middle of nowhere
    Posts
    1,137

    Thanks Thanks Given 
    2
    Thanks Thanks Received 
    339
    Thanked in
    264 Posts
    Rep Points
    4437694

    Quote Originally Posted by maxmuscle1 View Post
    Aug, 2021
    Gadeas Steroid intermediates : tried offering $176million to get AMRI Nanoparticle nano crystals , for steriod API market. (they said China would and is making it cheaper and the deal didnít happen.
    UGL/Pharma superfine/nanopowder anabolic steroid raws may be hitting the market. The only (micronized) raws I have seen : stanzolol for aqueous and test base for aqueous. They use the term micron or submicron based on the milling(through fine mesh (mechanical/ball/ and jet strainers). They have Wet milling and Dry milling. The reason behind micronizing a raw steroid powder is : increased bioavailability, more of the API(active pharmaceutical ingredient) in poorly soluble materials ie. carrier.
    Wet milling works better but can skew results, wet milling does tend to create finer particles, it also increases costs and steps and adds many variables that dry milling doesnít include.(most raw API Co. wonít do anything that increases their costs).

    The important Part
    REFERENCE FOR LAY PERSONS: milling -
    *Mechanical- a particle size of 200 mesh (74 microns), with a typical mid-range particle size of 80 mesh (177 microns). Contamination is a problem because they pulverize with metal(why we see it in proper lab analysis) if I donít see they tested for heavy metal contaminants, I wonít consider buying. (Not that I buy anything).
    *Ball mills- cheapest and most used in pharmaceutical industry. This technique also serves as an intensive mixing technique capable of producing co-ground, pharmaceutical-**excipient mixtures (Sustanon/Blends)comprising amorphous drug forms mixed with suitable hydrophilic excipients at the molecular level.
    *Jet Mills- jet mills allows the pharmaceutical manufacturer to grind a friable or crystalline material to an average particle size of 1 to 10 microns. One of the most important characteristics of a jet-milled product is the huge increase in surface area. Milling a material thatís 30 mesh (595 microns) down to 2,500 mesh (5 microns) results in 1,643,000 times the number of particles and a surface area thatís 118 times greater. This allows for faster chemical reaction times and improved pharmaceutical ingredient performance. They used four API compounds an increase of 50 percent in the solubility of an insoluble antimicrobial compound when the particle size was reduced from 2.4 μm(micron)to 800 or 300 nm(nano).

    Maxís Thoughts:
    This concludes my research(everyday), more to come. Soon very strong, less toxic orals, oils, injectables nasal, pellet, liquids, melting film strips will become available. Some using multiple technologies and changing the industry IR/ER/SR/CR oral and injectable (sustained/controlled/slow/long release). I can imagine a 400mg/ml testosterone propionate with zero chemicals added and No PIP, also; a 50mg testosterone propionate that equals 500mg because of increased bioavailability. They could also make 2000mg/2-3ml testosterone propionate that would release over a 14-90 day period, depending on what the customer needed.
    **They already have made a 100mg/.25ml and 200mg/.5ml testosterone that is currently trying to be marketed for subcutaneous injection, one has a 32g 4mm needle and the other is a needless auto injector(they are not yet available). Problem is: the Big Pharma companies are only interested in profits, they donít see value in making a powerful or safe anabolic steroid....but they are all over Large dose long acting HGH and Peptides because they can charge $30,000 a month for it. Hopefully in the countries that anabolic steroids are legal for use or sale, we will see the first products like these . Alpha Pharm made a CR(controlled-release)12 hr Dianabol 25mg tab and Levitra 20mg film strips(like Listerine).
    Amazing post you have me worried about contaminants but great read with alot of great information 👍

  3. #3
    Registered User
    maxmuscle1's Avatar


    Join Date
    Apr 2015
    Posts
    21,470

    Thanks Thanks Given 
    34,256
    Thanks Thanks Received 
    19,659
    Thanked in
    11,854 Posts
    Rep Points
    728561140

    Quote Originally Posted by Bigmurph View Post
    Amazing post you have me worried about contaminants but great read with alot of great information
    Yeah, when they had AnabolicLab testing , quite a few large UG brands had contaminated vials. A lot of companies donít pay to test that part . SIMEC AG was always the best lab analysis company . They do Kraft foods , Proctor & Gamble. Always had exact results

    Max

  4. #4
    Registered User
    B-Roll81's Avatar


    Join Date
    Sep 2021
    Posts
    78

    Thanks Thanks Given 
    0
    Thanks Thanks Received 
    29
    Thanked in
    21 Posts
    Rep Points
    284058

    Very interesting and helpful info. Thank you!

  5. #5
    Registered User
    MindlessWork's Avatar


    Join Date
    Mar 2017
    Posts
    12,149

    Thanks Thanks Given 
    11,695
    Thanks Thanks Received 
    3,586
    Thanked in
    2,883 Posts
    Rep Points
    2147483647

    Quote Originally Posted by maxmuscle1 View Post
    Yeah, when they had AnabolicLab testing , quite a few large UG brands had contaminated vials. A lot of companies donít pay to test that part . SIMEC AG was always the best lab analysis company . They do Kraft foods , Proctor & Gamble. Always had exact results

    Max
    Nowadays a lot of individuals have been sending their samples to Janoshik for testing as SIMEC was no longer accepting samples from the USA.
    Show me

Similar Threads

  1. Gh /peptide conversion Calculator to help you out!!! [emoji3593]
    By maxmuscle1 in forum Anabolic Steroids
    Replies: 0
    Last Post: 02-02-2021, 12:13 PM
  2. Why Choice of Chem and Materials are Important!! Read..[emoji3593]
    By maxmuscle1 in forum Research & Homebrew Chemistry
    Replies: 4
    Last Post: 10-25-2020, 09:27 AM
  3. WAYS TO THIN YOUR BLOOD!![emoji3593]
    By maxmuscle1 in forum Supplements
    Replies: 8
    Last Post: 10-16-2020, 05:43 AM
  4. THE OTHER BENEFITS OF P5P!![emoji3593][emoji3593]
    By maxmuscle1 in forum Supplements
    Replies: 12
    Last Post: 08-29-2020, 01:54 PM
  5. The strongest steroid to ever hit the market(vets)
    By Lokthan in forum Anabolic Steroids
    Replies: 78
    Last Post: 11-13-2017, 04:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Copyright© 2012-2021 Anabolic Steroid Discussion Forums